- Product Categories
- Friendly Links
Information Name: | Also known as assembly plate assembly platform |
Published: | 2014-09-30 |
Validity: | 300 |
Specifications: | Complete |
Quantity: | 1000.00 |
Price Description: | |
Detailed Product Description: | Assembly platform, also known as flat-panel assembly, the assembly fixing, mainly used in the assembly and commissioning of power machinery equipment, surface with a T-shaped groove, can be fixed power machinery equipment, can be assembled using. Assembly requires a platform technology, assembly platform [1] Face not have serious impact on the appearance of sand holes and performance of pores, cracks, slag, shrinkage, scratches, bumps, rust spots and other defects. 2, casting surface mounting platform should remove sand and smooth, painted solid. 3, the accuracy of the registration level is 0 -3 flat work surface, the hole diameter of less than 15mm of sand of the same material allows the plug, its hardness should be less than the hardness of the surrounding material. Face clogged sand holes should be no more than four, and the spacing between the sand holes should not be less than 80mm. 4, should be used to manufacture high-quality assembly platform fine gray cast iron or alloys and other materials, which face hardness should 170-220HB. 5, the assembly platform Face normally be by scraping process. Processing using the scraping of the plate working surface 3, the maximum allowable value of the surface roughness Ra 5um. 6, flatness tolerances specified in Table 2. 7, using the scraping process should be painted on the research test. After the research on the area of ??contact points to display a predetermined ratio shown in Table 3: or according to a square area of ??25mm × 25mm a predetermined number of contact points are shown in Table 3, and should any of 25mm × 25mm between the contact points is not more than 5:00. Cast fitter assembly platform, welding special platform, cast iron plate fitter platform by JB / T7974-99 standard manufacturing, product made of reinforced plate and box-style, rectangular face, material HT200, working surface using Calibrating technology, work surface processed V-shaped, T, U-shaped grooves and holes, long holes and so on. Flat is a flat piece benchmark instrument for detection or crossed. Tablet installation should be adjusted to the level of the load evenly distributed in the pivot, the ambient temperature (20 ± 5 ℃) should be used to prevent vibration. Machinery and equipment used in power assembly and commissioning surface with a T-shaped groove, can be fixed power machinery equipment, requiring robbery assembly platform can be assembled using face hardness HB170 ~ 240. After two aging treatment (artificial aging and natural aging 2 to 3 years). makes accuracy of product stability and good abrasion resistance. precision measurement according to the national standard test procedures prescribed execution. platform crossed, testing, measuring, welding, assembly, welding work platform. |
Admin>>>
You are the 11560 visitor
Copyright © GuangDong ICP No. 10089450, Wang Ming Tools Co., Ltd. Botou All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 11560 visitor
Copyright © GuangDong ICP No. 10089450, Wang Ming Tools Co., Ltd. Botou All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility