A cast iron plate of the periodic weekly inspection by national standards, depending on the circumstances test cycle for 6-12 months. Second, the cast iron plate bearing point cushion good pad level, to ensure that each anchor by force, to ensure the smooth entire cast iron plate. Third, when the cast iron plate installation will each anchor plate cast iron plate with good adjustment horn pad, the pad real, professional and technical personnel will be adjusted to qualified precision cast iron plate. Fourth, the use of cast iron plate gently to the workpiece, rough workpieces do not move on the cast iron plate, iron plate to avoid bump on the face, scratches and other damage. Fifth, in order to prevent the cast iron plate overall deformation, after use, to win the workpiece from the cast iron plate to avoid artifacts caused by prolonged heavy pressure on the cast iron plate iron plate deformation. Six, cast iron plate in order to prevent deformation occurs when lifting cast iron plate, use the same length of rope four iron was caught while lifting the four holes on the plate, the cast iron plate smooth lifting on transport. Seven, cast iron plate when not to promptly Face wash, then coated with anti-rust oil, and covered with a rust-proof paper, packaging with cast iron plate will cast iron plate cover to prevent usually pay no attention to result in cast iron Flat Face damage. Eight, cast iron plate should be installed in ventilated, dry environment, and away from heat, corrosive gases, corrosive liquids. 

keywords: Cast iron plate, T-slot platform, crossed platforms, welding platform, floor boring machine table, assembly platform,